Nissan Maxima Owners Manual: Remote engine start operating range

CAUTION

When the Intelligent Key battery is discharged or other strong radio wave sources are present near the operating location, the Intelligent Key operating range becomes narrower, and the Intelligent Key may not function properly.

The remote engine start function can only be used when the Intelligent Key is within the specified operating range from the vehicle.

The remote engine start operating range is approximately 197 ft (60 m) from the vehicle.

    Remote Engine Start
    The button will be on the NISSAN Intelligent Key if the vehicle has remote engine start. This feature allows the engine to start from outside the vehicle. The following features may be a ...

    Remote starting the vehicle
    To use the remote start feature to start the engine perform the following: 1. Aim the Intelligent Key at the vehicle. 2. Press the LOCK button to lock all doors. 3. Within 5 seconds press ...

    Other materials:

    Configuration (BCM)
    CONFIGURATION (BCM) : Description Vehicle specification needs to be written with CONSULT because it is not written after replacing BCM. Configuration has three functions as follows Function Description  "Before Replace ECU " Reads the vehi ...

    B2614 ACC relay circuit
    Description BCM controls the various electrical components and simultaneously supplies power according to the power supply position. BCM checks the power supply position internally. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE Tur ...

    Changing wheels and tires
    Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km). For additional information on tire replacing procedures, refer to "Flat tire" in the "In case of emergency" section of this manual. As soon as possible, tighten the wheel nuts to the specified torque with ...

    Nissan Maxima Owners Manual

    Nissan Maxima Service and Repair Manual

    © 2017-2025 Copyright www.nimainfo.com
    0.0056